Ultrasonic Flaw Detector Tfd800c Plus

Ultrasonic Flaw Detector TFD800C PLUS

★User friendly dialog interactive helps operations like Calibration, making curves, etc.

★ All tools you need: DAC, AVG, AWS, Weld diagram,etc.

★ Pulse Repeatition Frequency: 10-2000Hz precise adjust, high speed scan, no miss out.

★ High Signal to noise ratio, clear and stable echo, anti-noise design, perfect for tough working conditions.

★ 10-digit AD, high speed sampling leads to better echo diagram with all details. Sensitive and can detect even tiny flaws.

★ Crystal clear true-color display. Helpful user interface makes the operation much easier.

★Unlimited USB data storage.,PDF reports output.

Specifications

• Range:0-10000 mm ,at steel velocity
• Material Velocity:1000～10000 m/s
• Pulse Repetition Frequency:10-2000Hz
• Dynamic range:≥38dB
• Linearity: Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB.
• Resolving Power:>40dB (5P14)
• Sensitivity Leavings:>65dB
• Reject (suppression): 0 to 80% full screen height
• 500 independence setup, any criterion can be input freely, we can work in the scene without test block；
• Big memory of 1000 A graph
• Test Modes: Pulse echo, dual element and thru-transmission
• Probe Types: Single Straight, Single Angle,Daul Straight, Daul Anlge,Thrugh,Creeping,Surface
• Gate Monitors: Two independent gates controllable over entire sweep range
• Units: Inch or millimeter
• Power Requirements: AC Mains 100-240 VAC, 50-60 Hz
• Display Delay: -20 to 3400 µs
• Probe Delay/Zero Offset : 0 to 99.99µs
• Internal rechargeable Li-ion battery pack rated 7.2V at 5600 mAh
• 10 hours nominal operating time depending on display brightness
• 4 hours typical recharge time
• H×W×D(mm):240×170×38 (mm)
• Weight :1.0kg
• Operating Temperature: -10℃ to 50℃
• Storage Temperature: -30℃ to 50℃
• Pulse Energy: 200V, 300V, 400V, 500V selectable
• Rectification: Positive half wave, negative half wave, full wave, RF System
• Gate Monitors: Two independent gates controllable over entire sweep range
• Sensitivity: 110 dB max in selectable resolution 0.1, 1.0, 2.0, 6.0 dB.
• Transducer Connections: BNC or LEMO

Functions

• Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,ф).
• Flaw sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection.
• Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity .
• Convenient to make and use DAC and AVG to evaluate the echo, the curve can be modified and compensated.
• Connectting U-disk,the unit can get unlimited memory,PDF reports out put and Upadte system.
• Weld diagram.
• There are 15 standards of in the unit.
• AWS D1.1.
• Curved Surface Correction feature.
• Crack Height Measure function.
• Magnify gate:spreading of the gate range over the entire screen width.
• Auto-gain function.
• Envelope: Simultaneous display of live A-scan at 60 Hz update rate and envelope of A-scan display.
• Peak Hold: Compare frozen peak waveforms to live A-Scans to easily interpret test results.
• Scan Freeze:Display freeze holds waveform and sound path data.
• Alarm:Beep and LED.
• Real Time Clock.
• Fill echo.
• Capture mark.
• Echo color within the Gate.

Base Instrument Package

• Portable Ultrasonic Flaw Detector
• Straight Beam Transducer (4 MHz, Φ10)
• Angle Beam Transducer (4 MHz, 8 mm×9 mm, 60°)
• Interconnect Cable for the transducer (Q9-C5,or optional C9- C5)
• Rechargeable Li-Ion Battery Package, 8 amp hour
• Power supply/charger unit
• Operating Manual in English
• App Software
• Strap

​

phased array flaw detector

ut flaw detector

Ultrasonic Flaw Detector Tfd800c Plus Images